Go Down

Topic: Which Connector/Cable (Read 755 times) previous topic - next topic


Having got the wrong ebay thing twice, it is time to ask for help...

I have a sticky keypad thing, but the wire isn't quite long enough to reach the controller. The cable ends with a female header connector thing (so the board has male header pins) - as in the attached image. What do I need to buy to add a bit of extension to this?

Thanks for your help,


You can simply make your own extention, with basic connectors and some wire. Ebay , Radio Shack or some other electronic stores should have what you need.
My GitHub:


You need an 8-pin female to male dupont cable but I don't know where you can get one.
You can create one from one of these http://www.electrodragon.com/?product=dupont-jumper-cable-wires-femalefemale-different-pins-available-to-choose
together with a piece of this http://www.electrodragon.com/?product=same-length-pin-header-2-54mm


Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131