Go Down

Topic: Engineering drawing needed of the Arduino Uno (Read 426 times) previous topic - next topic

task

Where can I get the dimensions of the Arduino Uno?  I tried to measure it, but I don't trust my measurements.  The holes are on corners and I am having difficulty getting everything perfect

I am designing something that I want to print on a 3D printer and it will have pins where I can just plug the Arduino into.  I want to make sure I create the pins in the right places

HazardsMind

Look at the specs under Products > Arduino Uno
My GitHub:
https://github.com/AndrewMascolo?tab=repositories

Graynomad

Quote
Look at the specs under Products > Arduino Uno


And get this

Quote
The maximum length and width of the Uno PCB are 2.7 and 2.1 inches respectively,


In typical Arduino lack of documentation. Try this

www.robgray.com/temp/Arduino-PCB-dimensions.pdf

It was done for the Duenilanova so two of the headers will be slightly longer.

______
Rob
Rob Gray aka the GRAYnomad www.robgray.com

PaulS

You can also open the eagle files, output the data in Gerber format, and find the code that drills the holes. Compute the distance between the drill hole points. Or, just use the drill hole points in your design.

task


Go Up