Pages: [1]   Go Down
Author Topic: Introducing the Omega MP shield and Aztec  (Read 1027 times)
0 Members and 1 Guest are viewing this topic.
Muskoka
Offline Offline
Newbie
*
Karma: 0
Posts: 11
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Hello All,

Aztec MCU Prototyping is an authorized Arduino dealer.  In addition to Arduino we sell a variety of Arduino derivatives (Omega), prototyping accessories, components and some items related to other MCUs, which we'll never mention here.  We are small and just getting going, but can promise to offer the absolute best in customer service and overall value.  

One of the most recent items we've gotten in stock is the Omega MP programmer shield.  This is a handy little shield that helps turn your Arduino Uno, Duemilanove or 100% compatible, into a programmer.  It has on-board support for AtmegaXX8, AttinyX313, ATtinyX5 and ATtiny13 chips as well as both 10 and 6 pin ICSP headers.  It uses the ArduinoISP sketch to emulate an avrisp and has been tested with the latest release of the Arduin IDE and the version of avrdude that comes with it.  Best of all, it only $19.25.

For more information on the Omega MP shield you can find a link to the documentation here: http://aztecmcu.com/catalog/i105.html

Or have a look at what else we have to offer here: http://aztecmcu.com/id47.html

While you're over there, check out our new Dollar Store.  Everything in that category is a buck or less.  We've worked hard to bring you some great bargains there, but there is always room for more.  Let us know what you think we need to add and we'll do our best.

We really appreciate feedback of any kind, good or bad.  If you have any comments, concerns or information, please feel free to let us know at info (at) aztecmcu (dot) com, go to our "Contact Us" page, or just leave a reply to this post.

We'll be adding to what we currently have on an on-going basis, so check back once in a while and thanks for giving us a look.


* MPS1.jpg (135.7 KB, 1024x1025 - viewed 29 times.)
« Last Edit: December 15, 2012, 12:34:57 pm by AztecMCUPrototyping » Logged

Aztec MCU Prototyping

Windy City
Offline Offline
Jr. Member
**
Karma: 0
Posts: 90
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I've bought quite a bit of stuff off these guy's.  Including that programmer.  Very nice!

Selection on components is not huge, but their prices are hard to beat.  They also have some other unique stuff I've never seen elsewhere.

Thanks guy's!
Logged

Dirt Biker

Pages: [1]   Go Up
Jump to: