Go Down

Topic: Spi RAM (Read 1 time) previous topic - next topic

jamesvote

Tried to load SpiRAM2.zip from playground but it is empty?
Please advice if any one can throw some light on this, or if possible send me a copy?
Thanks

Nick Gammon

Link to the containing page please?
Please post technical questions on the forum, not by personal message. Thanks!

More info:
http://www.gammon.com.au/electronics

oric_dan

This is likely where he found it,

http://playground.arduino.cc//Main/SpiRAM

The first zip file INO subdirectory is empty. The 2nd is not, but it didn't compile, so I
imagine it'll take mucking around to get it to go. Google search didn't turn up anything
that obviously works.


Nick Gammon

This isn't that library, but I did a page about connecting to the 23K256 chip using SPI here:

http://www.gammon.com.au/forum/?id=10979

Maybe that will help.
Please post technical questions on the forum, not by personal message. Thanks!

More info:
http://www.gammon.com.au/electronics

oric_dan

You may be interested, they now have a 128 KByte version of the chip, also in DIP8 and ok to power at
5V. I just got some yesterday, but not yet hooked to anything.

http://www.digikey.com/product-detail/en/23LC1024-I%2FP/23LC1024-I%2FP-ND/3543083

Nick Gammon

Please post technical questions on the forum, not by personal message. Thanks!

More info:
http://www.gammon.com.au/electronics

jamesvote

Hi All
Thanks for the input, sorry for not putting in link to file, yes Oric_Dan that is the correct link
Thanks Nick for you example, I intend to use a FM25H20 (F-RAM) non volatile ram for data storage over a long period of time.
But would like to know what happened to the SpiRAM2zip file thou?
Thanks again

oric_dan

Quote
But would like to know what happened to the SpiRAM2zip file thou?


Guy who created the page lost it. ???

BTW, the new 23LC1024 128KB SRAM chips will run at 3.3V or 5V, whereas the 23K256
32KB chips require 3.3V, which is why I got the big ones.


Go Up