Go Down

Topic: Question about compatibility of product. (Read 309 times) previous topic - next topic

Ufoguy

I want to build a datalogger project and am going to use Jermey Blum's tutorial on datalogging as reference. My question is wether the product in this link http://store.extremeelectronics.co.in/MicroSD-TF-Module.html will work with his tutorial. Likewise I also want to know if all SD card modules can be connected using same method or does every one have a different method (Both hardware and software wise) .
If you want to meet a beautiful nurse you must be patient.

Osgeld

if the adapter (which is out of stock btw) uses SPI interface and has a 5 to 3.3 volt level shifter then they will work the same with the SD library or other typical arduino configurations

Ufoguy

It does have 5 to 3.3v shifter and the description says it brings out all the SPI pins. Thanks.
If you want to meet a beautiful nurse you must be patient.

Go Up