Go Down

Topic: Question about compatibility of product. (Read 311 times) previous topic - next topic


I want to build a datalogger project and am going to use Jermey Blum's tutorial on datalogging as reference. My question is wether the product in this link http://store.extremeelectronics.co.in/MicroSD-TF-Module.html will work with his tutorial. Likewise I also want to know if all SD card modules can be connected using same method or does every one have a different method (Both hardware and software wise) .
If you want to meet a beautiful nurse you must be patient.


if the adapter (which is out of stock btw) uses SPI interface and has a 5 to 3.3 volt level shifter then they will work the same with the SD library or other typical arduino configurations


It does have 5 to 3.3v shifter and the description says it brings out all the SPI pins. Thanks.
If you want to meet a beautiful nurse you must be patient.

Go Up

Quick Reply

With Quick-Reply you can write a post when viewing a topic without loading a new page. You can still use bulletin board code and smileys as you would in a normal post.

Warning: this topic has not been posted in for at least 120 days.
Unless you're sure you want to reply, please consider starting a new topic.

Note: this post will not display until it's been approved by a moderator.

shortcuts: alt+s submit/post or alt+p preview