Pages: [1]   Go Down
Author Topic: Question about compatibility of product.  (Read 301 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Full Member
***
Karma: 2
Posts: 181
So, you want to make something, huh?
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I want to build a datalogger project and am going to use Jermey Blum's tutorial on datalogging as reference. My question is wether the product in this link http://store.extremeelectronics.co.in/MicroSD-TF-Module.html will work with his tutorial. Likewise I also want to know if all SD card modules can be connected using same method or does every one have a different method (Both hardware and software wise) .
Logged

If you want to meet a beautiful nurse you must be patient.

SE USA
Offline Offline
Faraday Member
**
Karma: 41
Posts: 3783
@ssh0le
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

if the adapter (which is out of stock btw) uses SPI interface and has a 5 to 3.3 volt level shifter then they will work the same with the SD library or other typical arduino configurations
Logged


Offline Offline
Full Member
***
Karma: 2
Posts: 181
So, you want to make something, huh?
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

It does have 5 to 3.3v shifter and the description says it brings out all the SPI pins. Thanks.
Logged

If you want to meet a beautiful nurse you must be patient.

Pages: [1]   Go Up
Jump to: