Pages: [1]   Go Down
Author Topic: Which robot kit to buy?  (Read 2045 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Full Member
***
Karma: 3
Posts: 221
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I already have Vex Robotics and Lego Mindstorms kits (old kits with old electronics). I'm thinking of buying Bioloid Comprehensive Robot Kit which sells for $800. The kit could let me build any kind of robots but I have some arthritis and cerbral palsy. I'm worried that I may have problems assembling robots.
Logged

the land of sun+snow
Offline Offline
Faraday Member
**
Karma: 158
Posts: 2882
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

It's going to be a lot easier to build any pre-designed kit than trying to build your
own robot from scratch.
Logged

Offline Offline
Full Member
***
Karma: 3
Posts: 221
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

What about Lynxmotion Biped Scout kit which costs almost $180 or RoboBrothers RoboPhilo Humanoid Robot Kit which costs almost $400? Any tips?
Logged

the land of sun+snow
Offline Offline
Faraday Member
**
Karma: 158
Posts: 2882
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I've never bought any of those kits, just built several walkers, quadrupeds and
hexapods, from scratch. As I mentioned, it would be much easier with "any" kit
than from scratch. I like the Bioloid systems, as they allow you to try out different
designs, but never wanted to spend so much money. Bipeds, in general, are much
harder to build from scratch, as there are many torque and stability problems to
solve, so I would probably go with a kit for a biped.
Logged

Offline Offline
Full Member
***
Karma: 3
Posts: 221
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I ordered Lynxmotion servo brackets and other parts to build a humanoid robot like the one in the image:

http://www.lynxmotion.com/images/jpg/ironmanl.jpg
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 15
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
I ordered Lynxmotion servo brackets and other parts to build a humanoid robot like the one in the image:

http://www.lynxmotion.com/images/jpg/ironmanl.jpg
Wow, the robot is really cool! How much of it? Are you buy some servo brackets and assembling it by yourself?
Logged

the land of sun+snow
Offline Offline
Faraday Member
**
Karma: 158
Posts: 2882
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
You didn't mention if you bought the servos too. Bipeds like that have special torque
requirements on the hip and ankle servos, so you'll need to pay attention to the torque
values of the servos lynxmotion uses.
Logged

Offline Offline
Full Member
***
Karma: 3
Posts: 221
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I already have six 240 oz-in servos, six 240 oz-in servos on the way to my house, two Parallax standard 43.1 oz-in servos, and four EZ-Robot S08NF standard servos. Any tips on building the biped?
Logged

the land of sun+snow
Offline Offline
Faraday Member
**
Karma: 158
Posts: 2882
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I have no advice on this. Since you didn't buy a kit, you're largely on your own now.
You might be able to download instructions on building similar robots from the
lynxmotion site. To build a biped like the one you showed really takes a lot of work
and the program code will be very complicated - timing all those joints.
Logged

Pages: [1]   Go Up
Jump to: