Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: single side board  (Read 667 times)
0 Members and 1 Guest are viewing this topic.
Puneet verma
India
Offline Offline
Newbie
*
Karma: 1
Posts: 21
View Profile
« on: December 22, 2012, 01:26:24 pm »
 Bigger Bigger Smaller Smaller Reset Reset
I am making this single sided arduino board .
http://arduino.cc/en/Main/ArduinoBoardSerialSingleSided3

this has DB9 connector.

I want to know that , if this can be use directly or need some drivers ?

and can i able to use serial read feature through this ?
 
Logged

Osgeld
SE USA
Offline Offline
Faraday Member
**
Karma: 33
Posts: 3618
@ssh0le
View Profile
« Reply #1 on: December 22, 2012, 02:09:19 pm »
 Bigger Bigger Smaller Smaller Reset Reset
as long as you have a 9 pin com port it works fine
Logged
http://arduino.cc/forum/index.php?action=unread;boards=2,3,4,5,67,6,7,8,9,10,11,66,12,13,15,14,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,86,87,89,1;ALL

CrossRoads
Global Moderator
Boston area, metrowest
Offline Offline
Brattain Member
*****
Karma: 240
Posts: 16460
Available for Design & Build services
View Profile
WWW
« Reply #2 on: December 22, 2012, 02:10:29 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Your computer has an RS232 port?  That's probably all the driver you need.
Logged
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17

WinstonP
Georgia, US
Offline Offline
Jr. Member
**
Karma: 2
Posts: 83
View Profile
« Reply #3 on: December 22, 2012, 02:23:02 pm »
 Bigger Bigger Smaller Smaller Reset Reset
my understanding is that the Arduino IDE has a "built" in board descriptor for programing though I would make a change or two if you use a 328 instead of 168.
I would also relocate the reset button. hidden under a shield made it hard to reach.
as for the "I think you meant..." the DB-9 connector is still attached to the D0/D1 pins so you'll still be able to do regular digital stuff with it. so you shouldn't have problems there.
Oh, and I would add extra power connectors for 5v/Gnd; maybe something similar to a breadboard power rail. and maybe add a 3.3v power rail also.
that's one of the great things about Open Hardware. nothing's hidden and you can do whatever you want to with it in your own designs.

have fun with it.
Logged

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: