Pages: [1]   Go Down
Author Topic: suggestion for enhancing the tone() page  (Read 642 times)
0 Members and 1 Guest are viewing this topic.
Vienna
Offline Offline
Newbie
*
Karma: 0
Posts: 10
don't panic!
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Folks!

I found out that on the tone() reference page (http://arduino.cc/en/Reference/Tone) there is a misleading advice. it currently explains: Use of the tone() function will interfere with PWM output on pins 3 and 11 (on boards other than the Mega). On my Leonardo analogWrite works fine in pin3. tone() causes troubles with pin5!!!

rgds
-AH-
Logged

Pages: [1]   Go Up
Jump to: