Go Down

Topic: Arduino Due and ADK 2012 (Read 19 times) previous topic - next topic

aleu / Achim Leubner

Ensure you selected the right com port and read above about the erase button.
refined-apps.com

jangofei

#11
Jan 08, 2013, 10:23 am Last Edit: Jan 08, 2013, 10:28 am by jangofei Reason: 1
Thanks Aleu!

It should be correct com port(Arduino Due programming port on PC). And I pressed the erase button before uploading.

It seems that Due was not recognized by ADK2012 IDE after erasing (erasing done).

IDE should prompt like below if it uploads successfully?
.....
Verify successful
Set boot flash true
CPU reset.

jangofei

#12
Jan 08, 2013, 09:14 pm Last Edit: Jan 08, 2013, 10:42 pm by jangofei Reason: 1
Hello, All
I did it!!!
I changed port to Native USB for uploading sketch into Due.  Now I am enjoying the music from Nexus 7.

Thanks Aleu, Ardroid and all!!

jangofei

Another question:
I just use left channel or right channel to DAC0. Is it possible to use both of left and right channel? Thanks.

ardroid

Google's ADK2012 sample actually merge left/right channel into one and output to DAC0. Yes it is possible separate L/R to DAC0/1. I am thinking about actually doing so. However, I am currently woking on attaching bluetooth HCI module. I will let you know once it done.

-Kevin   

Go Up