The GS3 and the Nexus 7 can both recognize the Due with ADK 2012, I've tested with both. Are you running a custom ROM or kernel? Perhaps one that leaves out USB accessory mode?
In that case it must be the way the Due is representing itself. What sketch have you loaded on the Due?
Hi all,I just confirmed upload of modified ADK2012 to DUE on both Mac and Win in my desk.Mac: Macbook Pro 10.6 with JDK 6 DUE: program portWin: Windows7 64bit DUE: native port (BOSSA Program port (COM**))Thanks to aleu and jamgofei and all.
I have my Due working with sound from a Galaxy Nexus but the quality is pretty poor. I put a 1KHz tone on my phone and played it through the Due and it quickly becomes apparent that there is something wrong. There are gaps in the audio which don't seem to be periodic. On the scope I see small gaps about a millisecond long. The gaps happen about every 100msec (or so). After the gap, the output continues at the same voltage which makes me think the dac might be sending the same value during the gap until more data is available. Anyone else observe this?
Quote from: jangofei on Jan 06, 2013, 03:13 pmGreat! I have the following questions:1. Which Arduino IDE do you use? arduino-1.5.1r2? or adk2012_ide-win32-20120629?2. What app do you use on Nexus 7 to transfer data to Due?3. Is DC to supply power a must? Arduino Due can't work when I use a DC--3.3V & 2.0A. What DC do you use?1. Used ADK2012 IDE from Google2. This Terminal App, http://labs.arduino.cc/uploads/ADK/ArduinoTerminal/ThibaultTerminal_ICS_0001.apk3. You can use computer's USB power and I've tested 12V DC external power also. It works either way. (Arduino DUE has some issue with USBVSB (USB Master power control) That's why usbh.c needs to updated to work properly on DUE.
Great! I have the following questions:1. Which Arduino IDE do you use? arduino-1.5.1r2? or adk2012_ide-win32-20120629?2. What app do you use on Nexus 7 to transfer data to Due?3. Is DC to supply power a must? Arduino Due can't work when I use a DC--3.3V & 2.0A. What DC do you use?
New_Board.name=My Own BoardNew_Board.upload.tool=bossacNew_Board.upload.protocol=sam-baNew_Board.upload.maximum_size=524288New_Board.upload.use_1200bps_touch=trueNew_Board.upload.wait_for_upload_port=falseNew_Board.upload.native_usb=falseNew_Board.build.mcu=cortex-m3New_Board.build.f_cpu=84000000LNew_Board.build.core=arduinoNew_Board.build.extra_flags=-D__SAM3X8E__ -mthumbNew_Board.build.ldscript=linker_scripts/gcc/flash.ldNew_Board.build.variant=arduino_due_xNew_Board.build.variant_system_lib=libsam_sam3x8e_gcc_rel.a
#ifdef USBCONOriginal USBCore.cpp code goes inside the ifdef. I can't add or the post is too long and exceeds the maximum allowed length of forum, which is 9500 characters.#endif // USBCON
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16