i've made a mistake before, i consider Rs/Ro = ppm, but from fig.2 of datasheet is not so.
it seems that it is a power function (see attached).
so i made some power regression based on the values, and i obtain a scaling factor and an exponent
given those values
a = scaling factor obtained by datasheet figure, for the gas you need
b = exponent obtained by datasheet figure, for the gas you need
ppm = a*(Rs/Ro)^b
now, to obtain a valid Ro value, we have to know the ppm of a gas, for C02, we know the CO2 value for atmosphere,http://www.esrl.noaa.gov/gmd/ccgg/trends/#mlo
so i can obtain Ro value for the chip in open air.
can this be right?