Pages: [1]   Go Down
Author Topic: Voice recognition question  (Read 1019 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I want to connect my Arduino Uno to a stand-alone (no PC) voice recognition board which will allow me to

control my device with one or two word commands such as: "module blink,” “turn left”, “turn right,” "module

on,” "module off;” you get the idea.  I have searched the Internet and have found 2 similar voice recognition

boards, the easyVR and smartVR shields (at sparkfun), and the Bitvoicer (at 

(http://www.bitsophia.com/BitVoicer.aspx) which look pretty good on paper and on YouTube.  HOWEVER, from what

I can determine with my limited electronics knowledge, all 3 of those boards require a PC interface.  There

is another newer board, the ES6928P talking voice recognition system  at

http://www.engineeringshock.com/es6928p-voice-recognition-circuit.html Which looks like it might work.  I

also looked at the Speakjet, but it is designed for speaking, not for speech recognition.  Firstly, I would

like your expertise in confirming that what I have written above is either correct or incorrect.  Secondly,

are there other board possibilities that I have overlooked, including using a different microcontroller, such

as a PIC or other?  Please advise.  I am open to discussing any suggestions/ideas you might have. Thanks.
Logged

Brazil
Offline Offline
Newbie
*
Karma: 0
Posts: 12
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

if i'm not wrong, you only need the PC when creating the voice profiles.
Logged

Montreal
Offline Offline
Edison Member
*
Karma: 23
Posts: 2486
Per aspera ad astra.
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

You mat try stand alone arduino for a few commands:
http://coolarduino.wordpress.com/2012/10/18/speech-voice-recognition-remix/
Logged

USA, FL
Offline Offline
God Member
*****
Karma: 14
Posts: 686
A life? Where can I download one of those?
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Bitvoicer needs a PC connected at all times.  EasyVR needs a PC to program your commands only.  I have an EasyVR shield and it's standalone.  You just have to power the Arduino.
Logged

//LiNK

Offline Offline
Newbie
*
Karma: 1
Posts: 43
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

BitVoicer does not need to be physically connected to a PC. I added wireless comunication to my project (http://arduino.cc/forum/index.php/topic,140765.0.html), so I can have a speech activated Arduino anywhere my wireless network reaches.
« Last Edit: January 04, 2013, 04:26:47 pm by msb4180 » Logged

Pages: [1]   Go Up
Jump to: