It is a thyristor.
Similar to thermistor but has a slightly different operation
the buzzer will sound for a predetermined time varying on the capacitor value and the LED will stay lit
Swap R4 and SW5 in the second schematic, and remove BZ3 in the first schematic. Then combine them, such that SW2 and SW5 become the same thing, as do SW3 and SW4. But as Mike says, if you will be using an Arduino anyway, then it's much simpler to just connect the switches, buzzer and LED to the Arduino, and do the buzzer and LED control in software.
No it is not remotely similar to a thermistor. And you do not draw it like that. The gate line is a diagonal line leading to the under side of the cathode.http://en.wikipedia.org/wiki/File:SCR_symbol.svg
I was meant write a transistor.
QuoteI was meant write a transistor. If you did then the circuit would not work like you describe it. Once you remove the gate voltage you turn it off and I thought you said it latches on. If you have an SCR it would latch but a transistor would not.
Well, I thought it would be complicated if I used countdown timer along with this circuit. So I thought I will make 2 circuits. One with arduino which will do the countdown timer and second which is the loop wire circuit itself.
I was meant to write transistor as it is similar in someways to the thyristor.
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16