Go Down

Topic: Fluxamasynth Bagpipe chanter (Read 2 times) previous topic - next topic

Trazman001

hi

I am very new to all of this, the only project that I sucessfully finnished was the echanter from www.echanter.com
I was using a arduino extracore chip and a usb bub 2 to do it.

The project i would like to start on is a Fluxamasynth with arduino uno stuck in board incase i need to reprogram it
with midi intrument. maybee and board with midi in midi out. and have all 128 instruments

I done little programing with java and c++

I have connected the arduino uno to fluxamasynth with a usb to the uno

I need to know where to start


marco_c

#1
Dec 31, 2012, 06:56 am Last Edit: Jan 01, 2013, 11:26 am by marco_c Reason: 1
Arduino libraries http://arduinocode.codeplex.com
Parola hardware & library http://parola.codeplex.com

Trazman001

#2
Dec 31, 2012, 05:33 pm Last Edit: Jan 01, 2013, 05:38 am by Trazman001 Reason: 1
I was hopeing to find code to make this an instrument =(

will this code work?????


Const Device = CB220 "when i tried to verify this it said CONST DOES NOT NAME TYPE


    Opencom 1,31250,3,30,20

Putstr 1,240,127,127,4,1,0,127,247 'set the master volume, you can change  from 0 to 127 modifing the last 127 number value


    Putstr 1,192,1 ' program change, we set the instrument from 0 to 127 that we want ,we change the last value..!!

    Putstr 1,144,60,64 ' play notes on
    Delay 1000 ' we put a pause
    Putstr 1,128,60,64 ' turn off notes


marco_c

Sorry but I understood that you were going to make an instrument using the fluxamasynth as a base for the electronics. What exactly are you trying to do?
Arduino libraries http://arduinocode.codeplex.com
Parola hardware & library http://parola.codeplex.com

Trazman001

=( =( =(
I need to get the programing code right to make an midi bag pipe with all the 127 or 128 instruments.
I might add a board for midi in and midi out

Go Up