Go Down

Topic: good motors/gear box for use with tamiya tank (Read 489 times) previous topic - next topic

ive decided to try and build a tank robot with my arduino UNO. after some research ive discovered that the tamiya twin motor gear box's motors are weird in the fact that they have a low voltage and high amps. so my question is what motors/gear box can i use with a basic motor shield like this one: https://www.adafruit.com/products/81 or this one: https://www.sparkfun.com/products/9815

i was trying to save a few bucks, but would it be better/ simpler to just buy the more expensive and correct shield?: http://www.robotshop.com/pololu-low-voltage-serial-controller-2.html

Chagrin

Your motors have a 2.1A stall (peak, when stopped) current. The only driver you have linked that can handle that is the Pololu one.

Be aware that the Pololu controller has a serial interface and will make your programming a bit more complex; read through the specs fully so you know what you're getting into. You might want to look for a motor driver that takes PWM input for the simplicity in programming.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy