Loading...
« previous topic   next topic »
Pages: 1 [2]   Go Down
Author Topic: avrdude: stk500_recv (): programmer is not responding  (Read 1552 times)
0 Members and 1 Guest are viewing this topic.
lost_and_confused
Oz
Offline Offline
God Member
*****
Karma: 2
Posts: 560
View Profile
« Reply #15 on: January 04, 2013, 04:33:47 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Well, food for thought:

My FREETRONICS one the power LED comes on, and the Pin 13 Led.

The "L" led Slowly glows brighter and cycles this.

Pressing the reset button:  Nothing exciting happens.  The board doesn't seem to reset.
Neither LED really stop doing what they are doing.

My ARDUINO (genuine one) UNO is similar.
But the "L" led blinks.

Pressing the reset button:  Neither LED stop doing what they are/were doing.

TWO bung processors from TWO DIFFERENT SHOPS?

What are the chances?
Logged

jeffu
Offline Offline
Newbie
*
Karma: 0
Posts: 15
View Profile
« Reply #16 on: January 11, 2013, 05:11:06 am »
 Bigger Bigger Smaller Smaller Reset Reset
UPDATE: I ordered a new ATMEGA for my uno and it is now up and running again. I had got to thinking to figure out how I had fried my chip and I'm thinking when I powered it up I must have had something conductive underneath it, without realizing it, which shorted the chip.

Thanks again for all the help and I am glad I can get back into things. I attached a photo of a nice little holder I also got for my uno and breadboard from sparkfun.com
Logged

Pages: 1 [2]   Go Up
Print
« previous topic   next topic »
 
Jump to: