Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: Working with AtMega 16U2 [MIDI firmware]  (Read 464 times)
0 Members and 1 Guest are viewing this topic.
Soranne
France
Offline Offline
Jr. Member
**
Karma: 3
Posts: 68
Arduino rocks
View Profile
WWW
« on: January 02, 2013, 12:27:59 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Hello everyone!

I just got an Arduino R3, so with the new chip atmega 16U2 instead of 8U2 for the previous release.
As far as I understood the only difference between these two chips is just that they have a different amount of memory, am I right?
So a firmware made for the 8u2 would work on the 16u2, or do i need to recompile it?

The real problem I'm facing is that I'm trying to build a midi controler, and I can only find usb midi firmware for the 8u2 and not the 16u2.

Regards,
Soranne
Logged
My projects :
- Interfacing with Minitel : http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1271350467
- Arduino PIC programmer : http://arduino.cc/forum/index.php/topic,92929.msg698249.html#new

Visit my blog : http://soranne-electonicplace.blogspot.com/

tim7
Switzerland
Offline Offline
Sr. Member
****
Karma: 5
Posts: 370
View Profile
« Reply #1 on: January 02, 2013, 12:58:00 pm »
 Bigger Bigger Smaller Smaller Reset Reset
When I tried it I found that binaries compiled for the 8U2 and 16U2 were identical.
Logged

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: