Go Down

Topic: Kicad is garbage (Read 10013 times) previous topic - next topic

Osgeld

Jan 03, 2013, 06:00 am Last Edit: Jan 03, 2013, 06:03 am by Osgeld Reason: 1
I admit I am a bit spoiled with Altium but OMFG. Something that should have taken an hour just took 3 in kicad, and what am i greeted with?

whenever I try to export it borks half my pins, half my traces, redraws my schematic and asks me if I want to save this cluster FK

I dont care if its free and free, its garbage, I just wasted a night on a atmega 328, sd card, max232 and a voltage regulator, and I cant even print it off to PDF, export to SVG or anything else without it totally screwing it up

I would have been better off hand drawing it and scanning it ... cant beleive I even wasted my time learning this hodgepodge of CRAP

ugh!

EDIT: I cant even get to their site to see if theres an update, 504 Gateway Timeout...
http://arduino.cc/forum/index.php?action=unread;boards=2,3,4,5,67,6,7,8,9,10,11,66,12,13,15,14,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,86,87,89,1;ALL

mmcp42

have you tried EAGLE?
there are only 10 types of people
them that understands binary
and them that doesn't

Osgeld

yes, in the past, I was put off by the restricted pcb size, but over time I have noticed that I really haven't used more than that for most projects.

In all honestly before anyone tries to sell me on anything, I have Altium Designer with a full license on a work laptop I am allowed to take home. But it looks like for most my simple projects where I dont feel like dragging yet another computer home Eagle seems tops
http://arduino.cc/forum/index.php?action=unread;boards=2,3,4,5,67,6,7,8,9,10,11,66,12,13,15,14,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,86,87,89,1;ALL

TonyD

Have you tried Design Spark PCB

http://www.designspark.com/pcb

liudr

Not trying to sell you EAGLE but even from an outsider's view, as myself is not and EE, EAGLE is not hard to use and for simple boards is sufficient. I'm glad I can check kicad off my list of most wanted skills for a while so thanks for complaining!

lsvdw

Maybe it is just you who are unable to use KiCAD.

I have laid out plenty of boards using KiCAD, managing just fine with everything you complain about. Yes it has it quirks, but it is simply one of the best free tools out there in my opinion.

aarondc

An interesting post count. As a DB developer, this looks familiar...


Windows serial port monitor: Tellurium | Arduino serial port debugging library: DBG | Cusom LCD char generator | Technical questions will only be answered in forum threads

AWOL

@AaronDC: posts in bar sport don't count to your total.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Osgeld


Maybe it is just you who are unable to use KiCAD.

I have laid out plenty of boards using KiCAD, managing just fine with everything you complain about. Yes it has it quirks, but it is simply one of the best free tools out there in my opinion.


I have managed to lay out boards many times in KiCAD, and yes its one of the best totally free tools, out of a pool of what 2? Its useless to me if its going to pull random garbage out of its hat at any second, my time is more valuable than redoing work multiple times do to quirks and random crashes.

PS: I dont consider loosing half your work in a single click or dumping out of existence cause you rotate a part one too many times "quirks", those are deal breaking bugs.
http://arduino.cc/forum/index.php?action=unread;boards=2,3,4,5,67,6,7,8,9,10,11,66,12,13,15,14,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,86,87,89,1;ALL

aarondc


@AaronDC: posts in bar sport don't count to your total.



Ahhhh. :~ thanks.
Windows serial port monitor: Tellurium | Arduino serial port debugging library: DBG | Cusom LCD char generator | Technical questions will only be answered in forum threads

AlxDroidDev

Just use DipTrace: it rules.

It is extremely easy to use, and has a fulll-featured free version. Besides, it has a very complete library, with over 90,000 components, including some 3D componets.

I've been using it for the last year, and the boards I had manufactured by iTead Studio where designed in DipTrace.
Learn to live: Live to learn.
Showing off my work: http://arduino.cc/forum/index.php/topic,126197.0.html

Jaden66

I have used KiCad for many years, yes it has a few little issues but it is a great bit of software. I have etched out many boards and it does everything you need. It does take a bit of time to learn but it is worth the effort.

waterlubber

Fritzing is another option and ARDUINO.CC USES IT ITSELF. :3
waterlubber
Codes in: C++, Python, some VB, winDOS, YAML
Likes cake and arduino. And minecraft.

SirNickity

OK option for really, really simple circuits and for a quick virtual photo of a breadboard setup.  Not much else, IMO.  It's not in league with real PCB design software.

Pedro147

http://www.pedroduino.com

Go Up