Go Down

Topic: How to host a website that can control the Arudino over Internet (Read 1 time) previous topic - next topic

larrylai


Client/server test code with buttons.

Code: [Select]

//zoomkat 7-03-12, combined client and server
//simple button GET with iframe code
//for use with IDE 1.0
//open serial monitor and send an g to test client and
//see what the arduino client/server receives
//web page buttons make pin 5 high/low
//use the ' in html instead of " to prevent having to escape the "
//address will look like http://192.168.1.102:84 when submited
//for use with W5100 based ethernet shields
//note that the below bug fix may be required
// http://code.google.com/p/arduino/issues/detail?id=605

#include <SPI.h>
#include <Ethernet.h>

byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //assign arduino mac address
byte ip[] = {192, 168, 1, 102 }; // ip in lan assigned to arduino
byte gateway[] = {192, 168, 1, 1 }; // internet access via router
byte subnet[] = {255, 255, 255, 0 }; //subnet mask
EthernetServer server(84); //server port arduino server will use
EthernetClient client;
char serverName[] = "web.comporium.net"; // (DNS) zoomkat's test web page server
//byte serverName[] = { 208, 104, 2, 86 }; // (IP) zoomkat web page server IP address

String readString; //used by server to capture GET request

//////////////////////

void setup(){

  pinMode(5, OUTPUT); //pin selected to control
  pinMode(6, OUTPUT); //pin selected to control
  pinMode(7, OUTPUT); //pin selected to control
  pinMode(8, OUTPUT); //pin selected to control

  //pinMode(5, OUTPUT); //pin 5 selected to control
  Ethernet.begin(mac,ip,gateway,gateway,subnet);
  server.begin();
  Serial.begin(9600);
  Serial.println("server/client 1.0 test 7/03/12"); // keep track of what is loaded
  Serial.println("Send an g in serial monitor to test client"); // what to do to test client
}

void loop(){
  // check for serial input
  if (Serial.available() > 0)
  {
    byte inChar;
    inChar = Serial.read();
    if(inChar == 'g')
    {
      sendGET(); // call client sendGET function
    }
  } 

  EthernetClient client = server.available();
  if (client) {
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();

        //read char by char HTTP request
        if (readString.length() < 100) {

          //store characters to string
          readString += c;
          //Serial.print(c);
        }

        //if HTTP request has ended
        if (c == '\n') {

          ///////////////
          Serial.print(readString); //print to serial monitor for debuging

            //now output HTML data header
          if(readString.indexOf('?') >=0) { //don't send new page
            client.println(F("HTTP/1.1 204 Zoomkat"));
            client.println();
            client.println(); 
          }
          else {   
            client.println(F("HTTP/1.1 200 OK")); //send new page on browser request
            client.println(F("Content-Type: text/html"));
            client.println();

            client.println(F("<HTML>"));
            client.println(F("<HEAD>"));
            client.println(F("<TITLE>Arduino GET test page</TITLE>"));
            client.println(F("</HEAD>"));
            client.println(F("<BODY>"));

            client.println(F("<H1>Zoomkat's simple Arduino 1.0 button</H1>"));

            // DIY buttons
            client.println(F("Pin5"));
            client.println(F("<a href=/?on2 target=inlineframe>ON</a>"));
            client.println(F("<a href=/?off3 target=inlineframe>OFF</a><br><br>"));

            client.println(F("Pin6"));
            client.println(F("<a href=/?on4 target=inlineframe>ON</a>"));
            client.println(F("<a href=/?off5 target=inlineframe>OFF</a><br><br>"));

            client.println(F("Pin7"));
            client.println(F("<a href=/?on6 target=inlineframe>ON</a>"));
            client.println(F("<a href=/?off7 target=inlineframe>OFF</a><br><br>"));

            client.println(F("Pin8"));
            client.println(F("<a href=/?on8 target=inlineframe>ON</a>"));
            client.println(F("<a href=/?off9 target=inlineframe>OFF</a><br><br>"));

            client.println(F("Pins"));
            client.println(F("&nbsp;<a href=/?off2468 target=inlineframe>ALL ON</a>"));
            client.println(F("&nbsp;<a href=/?off3579 target=inlineframe>ALL OFF</a><br><br>"));

           
           
                      // mousedown buttons
          client.println(F("<input type=button value=ON onmousedown=location.href='/?on4;' target=inlineframe>"));
          client.println(F("<input type=button value=OFF onmousedown=location.href='/?off5;' target=inlineframe>"));       
          client.println(F("&nbsp;<input type=button value='ALL OFF' onmousedown=location.href='/?off3579;' target=inlineframe><br><br>"));       
                   
          // mousedown radio buttons
          client.println(F("<input type=radio onmousedown=location.href='/?on6;' target=inlineframe>ON</>"));
          client.println(F("<input type=radio onmousedown=location.href='/?off7; target=inlineframe'>OFF</>"));
          client.println(F("&nbsp;<input type=radio onmousedown=location.href='/?off3579;' target=inlineframe>ALL OFF</><br><br>"));   
   
         
          // custom buttons
          client.print(F("<input type=submit value=ON target=inlineframe style=width:100px;height:45px onClick=location.href='/?on8;'>"));
          client.print(F("<input type=submit value=OFF target=inlineframe style=width:100px;height:45px onClick=location.href='/?off9;' target=inlineframe>"));
          client.print(F("&nbsp;<input type=submit value='ALL OFF' target=inlineframe style=width:100px;height:45px onClick=location.href='/?off3579;' target=inlineframe>"));

           
            client.println(F("<IFRAME name=inlineframe style='display:none'>"));         
            client.println(F("</IFRAME>"));

            client.println(F("</BODY>"));
            client.println(F("</HTML>"));
          }

          delay(1);
          //stopping client
          client.stop();

          ///////////////////// control arduino pin
          if(readString.indexOf('2') >0)//checks for 2
          {
            digitalWrite(5, HIGH);    // set pin 5 high
            Serial.println("Led 5 On");
            Serial.println();
          }
          if(readString.indexOf('3') >0)//checks for 3
          {
            digitalWrite(5, LOW);    // set pin 5 low
            Serial.println("Led 5 Off");
            Serial.println();
          }
          if(readString.indexOf('4') >0)//checks for 4
          {
            digitalWrite(6, HIGH);    // set pin 6 high
            Serial.println("Led 6 On");
            Serial.println();
          }
          if(readString.indexOf('5') >0)//checks for 5
          {
            digitalWrite(6, LOW);    // set pin 6 low
            Serial.println("Led 6 Off");
            Serial.println();
          }
          if(readString.indexOf('6') >0)//checks for 6
          {
            digitalWrite(7, HIGH);    // set pin 7 high
            Serial.println("Led 7 On");
            Serial.println();
          }
          if(readString.indexOf('7') >0)//checks for 7
          {
            digitalWrite(7, LOW);    // set pin 7 low
            Serial.println("Led 7 Off");
            Serial.println();
          }     
          if(readString.indexOf('8') >0)//checks for 8
          {
            digitalWrite(8, HIGH);    // set pin 8 high
            Serial.println("Led 8 On");
            Serial.println();
          }
          if(readString.indexOf('9') >0)//checks for 9
          {
            digitalWrite(8, LOW);    // set pin 8 low
            Serial.println("Led 8 Off");
            Serial.println();
          }         

          //clearing string for next read
          readString="";

        }
      }
    }
  }
}

//////////////////////////
void sendGET() //client function to send and receive GET data from external server.
{
  if (client.connect(serverName, 80)) {
    Serial.println("connected");
    client.println("GET /~shb/arduino.txt HTTP/1.0");
    client.println();
  }
  else {
    Serial.println("connection failed");
    Serial.println();
  }

  while(client.connected() && !client.available()) delay(1); //waits for data
  while (client.connected() || client.available()) { //connected or data available
    char c = client.read();
    Serial.print(c);
  }

  Serial.println();
  Serial.println("disconnecting.");
  Serial.println("==================");
  Serial.println();
  client.stop();

}





for me,the Eternet Shield im using not is missing the sticker with Mac address on it, What's worse,im living on Campus so i dont have my router but use the internet provided by Uni. In this situation, can i just use the Mac address and IP address .etc. given in your Sketch? or is there any way that i can figure out my own Mac address and IP address?

PaulS

The MAC address must be unique on the network. You can try the address in zoomkat's code. It is likely to be unique.

The IP address is NOT. You must have a unique IP address in the range defined by your school. They are likely to be using DHCP to assign addresses to devices that connect to the network. The Arduino supports using DHCP to get an address.

zoomkat

Quote
for me,the Eternet Shield im using not is missing the sticker with Mac address on it, What's worse,im living on Campus so i dont have my router but use the internet provided by Uni. In this situation, can i just use the Mac address and IP address .etc. given in your Sketch? or is there any way that i can figure out my own Mac address and IP address?


Go to walmart and get a netgear 614 router for $25 so you can do your testing with/without the university network.
Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   8)

larrylai

thanks all of you from explanation and examples...i think i have got some clues now....time to work harder and understand the codes!

larrylai




Go to walmart and get a netgear 614 router for $25 so you can do your testing with/without the university network.


BTW,as i see in the sketch, am i using the server offered by u?is it possible for me to use my Arduino as the server as well?

Go Up