Go Down

Topic: connecting two common ground on the breadboard to one on arduino? (Read 1 time) previous topic - next topic

codlink


No, all grounds MUST be connected.


lol, true, but can think of instances where you shouldn't, but that's for another discussion.. 

Like Larry said, we need a schematic of your setup to help in more detail.
//LiNK

A4kash

here ground fromarduino is not connected with the grounds from two leds...

LarryD

I am having some trouble understanding.
The cathodes of all the LEDS can share a common ground point on a breadboard.
The way you have it in your schematic isn't the same as how you have it wired up!

A4kash

Even without connecting common ground it worked and i am wondering how this circuit worked!!!Having problem in it....

fungus


Even without connecting common ground it worked and i am wondering how this circuit worked!!!Having problem in it....


Grab a multimeter and you can measure the difference between the grounds. Maybe you got lucky and it wasn't enough difference to burn out your LEDs or Arduino.

But don't depend on it. One day the magic smoke WILL come out of your components if you don't use common ground.

No, I don't answer questions sent in private messages (but I do accept thank-you notes...)

Go Up