Pages: [1]   Go Down
Author Topic: Making Breadboarding Easier  (Read 888 times)
0 Members and 1 Guest are viewing this topic.
Centennial, CO
Offline Offline
Newbie
*
Karma: 0
Posts: 35
It should work...
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

I seem to build a lot of Arduino-compatible breadboard projects. I can't help myself. smiley  I've been making some boards for myself and others to make things a little easier here and there. They're available on Tindie

First, a better microSD breakout. Better? Well, it plugs right into pins D10-D13. No jumper wires. Power just plugs into the breadboard rails. I call it eeZee microSD. 5V safe, can run off 5V or 3.3V with hinged lid microSD socket.



Second, the eeZee Crystal. This just plugs in next to the XTAL1/XTAL2/GND pins. I made some for me and keep running out.



Also an 8-pin ATtiny target / breakout board as I do a lot of 8-pin ATtiny projects. Programmable with 6-pin ISP header.



Then there's the 20-pin ATtiny target/breakout currently a Tindie Fundraiser



More designs in the pipeline. Please stay tuned. Thanks smiley

Michael
www.bot-thoughts.com
Logged


Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 223
Posts: 13905
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Smart design!
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Pages: [1]   Go Up
Jump to: