Go Down

Topic: Making Breadboarding Easier (Read 960 times) previous topic - next topic

bot-thoughts

I seem to build a lot of Arduino-compatible breadboard projects. I can't help myself. :)  I've been making some boards for myself and others to make things a little easier here and there. They're available on Tindie

First, a better microSD breakout. Better? Well, it plugs right into pins D10-D13. No jumper wires. Power just plugs into the breadboard rails. I call it eeZee microSD. 5V safe, can run off 5V or 3.3V with hinged lid microSD socket.



Second, the eeZee Crystal. This just plugs in next to the XTAL1/XTAL2/GND pins. I made some for me and keep running out.



Also an 8-pin ATtiny target / breakout board as I do a lot of 8-pin ATtiny projects. Programmable with 6-pin ISP header.



Then there's the 20-pin ATtiny target/breakout currently a Tindie Fundraiser



More designs in the pipeline. Please stay tuned. Thanks :)

Michael
www.bot-thoughts.com
http://www.bot-thoughts.com/

robtillaart

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Go Up