Go Down

Topic: NUMBER_MOTOR'was not declared in this scope (Read 3104 times) previous topic - next topic

strong

Sorry to waste you guy's time.......Think I will just buy the naza flight controller for my quadcopter.........This arduino stuff is way to much to mak all thing work.

PaulS

Quote
This arduino stuff is way to much to mak all thing work.

Especially if you don't post any code, or put any effort into it. How difficult is a copy/paste, anyway?

But, by all means, buy something ready-made. You will be better off. Quit trying to learn anything. That only leads to enlightenment.


AWOL

I just put "muiltwii_2_1_mega2_0_gps" into Google, and got ONE result - this thread.

See what we're up against?
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

strong

Just glad this arduino stuff was cheap.......It worked good to.....But when you have a problem its to big of a problem for me .........time for naza........Everyone says it better just can't do way points.......Im going to see.

AWOL

OP are you trolling?
Or are you simply not comprehending that not all of us know every single last application that has ever been written for the Arduino, and that therefore, to help YOU, you need to help US?
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.


Jantje


I just put "muiltwii_2_1_mega2_0_gps" into Google, and got ONE result - this thread.

See what we're up against?

A simple loop; I would say my friend (stiff upper lip icon missing  ]:D )
Code: [Select]
while true;
will do
One could also specify it more specific as
Code: [Select]
label  http://arduino.cc/forum/index.php?action=post;topic=141566.15;num_replies=21#top
goto http://arduino.cc/forum/index.php?action=post;topic=141566.15;num_replies=21#top

That will keep the Arduino busy for a while  8)
rofl
Best regards
Jantje
Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

AWOL

#23
Jan 09, 2013, 11:53 am Last Edit: Jan 09, 2013, 12:13 pm by AWOL Reason: 1
In case anyone is still wondering, I put " multiwii_2_1_mega2_0_gps" (note spelling) into google, downloaded the ZIP from the first result, copied it into my library folder, opened the IDE, opened the example, set "board" to a "Nano 328", and compiled it.
Here's the error message I got:

Binary sketch size: 30280 bytes (of a 30720 byte maximum)


Edit: I should point out that I don't know if it would actually run on a Nano, but it does most definitely compile straight out of the box.
"Pete, it's a fool looks for logic in the chambers of the human heart." Ulysses Everett McGill.
Do not send technical questions via personal messaging - they will be ignored.

Jantje


In case anyone is still wondering, I put " multiwii_2_1_mega2_0_gps" (note spelling) into google, downloaded the ZIP from the first result, copied it into my library folder, opened the IDE, opened the example, set "board" to a "Nano 328", and compiled it.
Here's the error message I got:

Binary sketch size: 30280 bytes (of a 30720 byte maximum)


Edit: I should point out that I don't know if it would actually run on a Nano, but it does most definitely compile straight out of the box.


It is amazing how much time and effort moderators put in helping people out.
I would like to thank the moderators for their effort; even in hopeless cases.
Thank you very mutch
Best regards
Jantje
Do not PM me a question unless you are prepared to pay for consultancy.
Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -

Go Up