Go Down

Topic: Seeedstudio Motor Shield question (Read 1 time) previous topic - next topic

CLUless

Jan 09, 2013, 09:33 pm Last Edit: Jan 10, 2013, 01:23 pm by CLUless Reason: 1
Hello everyone,
    Restarted toying with my Arduino Uno and ran into a little problem I have a Seedstudio Motor Shield V1.0, but I can't find any documentation of how the pings from the Arduino line-up with the grove connectors. Cheers.

This is the motor shield I have: http://www.seeedstudio.com/wiki/Motor_Shield_V1.0

SouthernAtHeart

If you add some links to the items you're working with, folks can help better.

Runaway Pancake


... but I can't find any documentation of how the pings from the Arduino line-up with the grove connectors. Cheers.
This is the motor shield I have: http://www.seeedstudio.com/wiki/Motor_Shield_V1.0


The labels (silkscreen) near the Grove connectors indicate the Arduino pin associated with each terminal.

http://www.seeedstudio.com/wiki/images/a/a3/Motor_shield-hard3.jpg
"Hello, I must be going..."
"You gotta fight -- for your right -- to party!"
Don't react - Read.
"Who is like unto the beast? who is able to make war with him?"

CLUless

Hmm. That's what I thought. Guess the problem's with gotta be either the sensor or the connection. For whatever reason, the controller reboots when the sensor is connected. Doesn't have the problem if I don't use the shield. Time to buy some grove connectors.

Go Up