next topic »

[on:]

Hello everyone,
     Restarted toying with my Arduino Uno and ran into a little problem I have a Seedstudio Motor Shield V1.0, but I can't find any documentation of how the pings from the Arduino line-up with the grove connectors. Cheers.

This is the motor shield I have: http://www.seeedstudio.com/wiki/Motor_Shield_V1.0

[Reply #1 on:]

If you add some links to the items you're working with, folks can help better.

[Reply #2 on:]

... but I can't find any documentation of how the pings from the Arduino line-up with the grove connectors. Cheers.
This is the motor shield I have: http://www.seeedstudio.com/wiki/Motor_Shield_V1.0

The labels (silkscreen) near the Grove connectors indicate the Arduino pin associated with each terminal.

http://www.seeedstudio.com/wiki/images/a/a3/Motor_shield-hard3.jpg

[Reply #3 on:]

Hmm. That's what I thought. Guess the problem's with gotta be either the sensor or the connection. For whatever reason, the controller reboots when the sensor is connected. Doesn't have the problem if I don't use the shield. Time to buy some grove connectors.