Nun versuche ich auf den einen UNO den Bootloader"ATmega328 on a breadboard (8MHz internal clock)" zu brennen.
Note for Arduino 1.0: you need to make one small change to the ArduinoISP code. Find the line in the heartbeat() function that says "delay(40);" and change it to "delay(20);".
Note for the Arduino Uno: you'll need to add a 10 uF capacitor between reset and ground.
avrdude -c arduino -p ATMEGA328P -P /dev/ttyACM0 -b 19200 -U lfuse:r:low:b
avrdude -c arduino -p m8 -P /dev/ttyACM0 -b 19200 -U lfuse:r:low:b
avrdude: Device signature = 0x1e950favrdude: Expected signature for ATMEGA8 is 1E 93 07 Double check chip, or use -F to override this check.avrdude done. Thank you.