Go Down

Topic: how to use LabVIEW for receive data from serial monitor ? (Read 2 times) previous topic - next topic

mickeleckorn

Can i use 2 Xbees(one with arduino to LabVIEW and one with LM35) and 1 Arduino for temperature monitoring in LabVIEW ? , How to use LabVIEW(LIFA or VISA) for receive data from serial monitor arduino? ?

I'm newbie for LabVIEW Arduino and Xbee and I'm so confused.

I've used
Arduino UNO
Xbee S2 & Xbee S2PRO
Xbee Shield from dfrobot
LM35
LabVIEW

PaulS

Quote
How to use LabVIEW(LIFA or VISA) for receive data from serial monitor arduino? ?

You can't. LabVIEW can receive data from the same serial port that the Serial Monitor does, but not at the same time. Only one application can connect to a serial port at a time.

Quote
I'm newbie for LabVIEW Arduino and Xbee and I'm so confused.

Then, a simpler project, or breaking this one down into smaller pieces, is in order.

robtillaart

Quote
Only one application can connect to a serial port at a time.

There are serial port replicators applications but IIRC these are not really cheap.
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

mickeleckorn

Thanks , All

i want to receive  data in difference time , how i can config this

PaulS

Quote
i want to receive  data in difference time , how i can config this

Start with learning when to use capital letters, like an adult. Then, explain what this means.

Go Up