Pages: [1]   Go Down
Author Topic: how to use LabVIEW for receive data from serial monitor ?  (Read 2584 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 17
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Can i use 2 Xbees(one with arduino to LabVIEW and one with LM35) and 1 Arduino for temperature monitoring in LabVIEW ? , How to use LabVIEW(LIFA or VISA) for receive data from serial monitor arduino ?

I'm newbie for LabVIEW Arduino and Xbee and I'm so confused.

I've used
Arduino UNO
Xbee S2 & Xbee S2PRO
Xbee Shield from dfrobot
LM35
LabVIEW
Logged

Seattle, WA USA
Offline Offline
Brattain Member
*****
Karma: 653
Posts: 50881
Seattle, WA USA
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
How to use LabVIEW(LIFA or VISA) for receive data from serial monitor arduino ?
You can't. LabVIEW can receive data from the same serial port that the Serial Monitor does, but not at the same time. Only one application can connect to a serial port at a time.

Quote
I'm newbie for LabVIEW Arduino and Xbee and I'm so confused.
Then, a simpler project, or breaking this one down into smaller pieces, is in order.
Logged

Global Moderator
Netherlands
Online Online
Shannon Member
*****
Karma: 227
Posts: 14026
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
Only one application can connect to a serial port at a time.
There are serial port replicators applications but IIRC these are not really cheap.
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Offline Offline
Newbie
*
Karma: 0
Posts: 17
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks , All

i want to receive  data in difference time , how i can config this
Logged

Seattle, WA USA
Offline Offline
Brattain Member
*****
Karma: 653
Posts: 50881
Seattle, WA USA
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
i want to receive  data in difference time , how i can config this
Start with learning when to use capital letters, like an adult. Then, explain what this means.
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 17
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

How Xbee Need to use X-CTU before communication with LabVIEW ?
Logged

Seattle, WA USA
Offline Offline
Brattain Member
*****
Karma: 653
Posts: 50881
Seattle, WA USA
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Quote
How Xbee Need to use X-CTU before communication with LabVIEW ?
The XBee doesn't communicate with LabVIEW. It puts data on the serial port and gets data from the serial port. Whether the other end of that serial port is connected to the Serial Monitor application or LabVIEW is irrelevant.

Why are you using Mesh Network modules to do Point to Point communications? How have you configured the XBees? Do you KNOW that they communicate?

Finally, answer the questions that are asked before asking more.
Logged

Pages: [1]   Go Up
Jump to: