Go Down

Topic: How to read analog 0-24V signal (Read 980 times) previous topic - next topic



I need to read a 0-24V signal or 0-100V. I know how to reduce the voltage using a voltage divider, but is it possible to reduce voltage in some other way, so i can feed the signal to a 5V inputpin.

In other words, I want to convert a 0-24V signal to 0-5V signal.


Resistor divider the easiest and cheapest way to reduce a voltage. If you need galvanic isolation between two circuits than look here:
There are also some special made IC to measure high side voltage, do a search for BMS ( battery management system ) for example.


A voltage divider with two resistors is best/easiest/cheapest.

No, I don't answer questions sent in private messages (but I do accept thank-you notes...)

Go Up

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

via Egeo 16
Torino, 10131