Go Down

Topic: Multiple Services running on Ethernet Shield module at same time (Read 1 time) previous topic - next topic

Frisky

Hi
Is possible to run multiple services with a Ethernet shield module at the same time?
I'm looking to use port 80 for a simple web server and send twitter messages out with the twitter library via http://api.twitter.com. I'm using an AtMega2560 board I'm new to the ethernet shield and thinking about some ideas for uses for it.
Thanks for viewing the topic
Don

zoomkat

Client/server test code

Code: [Select]

//zoomkat 7-03-12, combined client and server
//simple button GET with iframe code
//for use with IDE 1.0
//open serial monitor and send an g to test client and
//see what the arduino client/server receives
//web page buttons make pin 5 high/low
//use the ' in html instead of " to prevent having to escape the "
//address will look like http://192.168.1.102:84 when submited
//for use with W5100 based ethernet shields
//note that the below bug fix may be required
// http://code.google.com/p/arduino/issues/detail?id=605

#include <SPI.h>
#include <Ethernet.h>

byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; //assign arduino mac address
byte ip[] = { 192, 168, 1, 102 }; // ip in lan assigned to arduino
byte gateway[] = { 192, 168, 1, 1 }; // internet access via router
byte subnet[] = { 255, 255, 255, 0 }; //subnet mask
EthernetServer server(84); //server port arduino server will use
EthernetClient client;
char serverName[] = "web.comporium.net"; // (DNS) zoomkat's test web page server
//byte serverName[] = { 208, 104, 2, 86 }; // (IP) zoomkat web page server IP address

String readString; //used by server to capture GET request

//////////////////////

void setup(){

  pinMode(5, OUTPUT); //pin 5 selected to control
  Ethernet.begin(mac,ip,gateway,gateway,subnet);
  server.begin();
  Serial.begin(9600);
  Serial.println("server/client 1.0 test 7/03/12"); // keep track of what is loaded
  Serial.println("Send an g in serial monitor to test client"); // what to do to test client
}

void loop(){
  // check for serial input
  if (Serial.available() > 0)
  {
    byte inChar;
    inChar = Serial.read();
    if(inChar == 'g')
    {
      sendGET(); // call client sendGET function
    }
  } 

  EthernetClient client = server.available();
  if (client) {
    while (client.connected()) {
      if (client.available()) {
        char c = client.read();

        //read char by char HTTP request
        if (readString.length() < 100) {

          //store characters to string
          readString += c;
          //Serial.print(c);
        }

        //if HTTP request has ended
        if (c == '\n') {

          ///////////////
          Serial.println(readString); //print to serial monitor for debuging

            //now output HTML data header
          if(readString.indexOf('?') >=0) { //don't send new page
            client.println("HTTP/1.1 204 Zoomkat");
            client.println();
            client.println(); 
          }
          else {   
            client.println("HTTP/1.1 200 OK"); //send new page on browser request
            client.println("Content-Type: text/html");
            client.println();

            client.println("<HTML>");
            client.println("<HEAD>");
            client.println("<TITLE>Arduino GET test page</TITLE>");
            client.println("</HEAD>");
            client.println("<BODY>");

            client.println("<H1>Zoomkat's simple Arduino 1.0 button</H1>");

            client.println("<a href='/?on' target='inlineframe'>ON</a>");
            client.println("<a href='/?off' target='inlineframe'>OFF</a>");

            client.println("<IFRAME name=inlineframe style='display:none'>");         
            client.println("</IFRAME>");

            client.println("</BODY>");
            client.println("</HTML>");
          }

          delay(1);
          //stopping client
          client.stop();

          ///////////////////// control arduino pin
          if(readString.indexOf("on") >0)//checks for on
          {
            digitalWrite(5, HIGH);    // set pin 5 high
            Serial.println("Led On");
          }
          if(readString.indexOf("off") >0)//checks for off
          {
            digitalWrite(5, LOW);    // set pin 5 low
            Serial.println("Led Off");
          }
          //clearing string for next read
          readString="";

        }
      }
    }
  }
}

//////////////////////////
void sendGET() //client function to send and receive GET data from external server.
{
  if (client.connect(serverName, 80)) {
    Serial.println("connected");
    client.println("GET /~shb/arduino.txt HTTP/1.0");
    client.println();
  }
  else {
    Serial.println("connection failed");
    Serial.println();
  }

  while(client.connected() && !client.available()) delay(1); //waits for data
  while (client.connected() || client.available()) { //connected or data available
    char c = client.read();
    Serial.print(c);
  }

  Serial.println();
  Serial.println("disconnecting.");
  Serial.println("==================");
  Serial.println();
  client.stop();

}

Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   8)

Frisky

I guess I should have stated that I was using the simple web server sample provided.  This looks interesting ill look at your client server. Im just going to try some code for Twitter posting and the web server together and see what happens








fafidio

why this code doesn't work?
When compiling, it makes a lot of errors! Does it work on Aduino 0022?

SurferTim


why this code doesn't work?
When compiling, it makes a lot of errors! Does it work on Aduino 0022?

It will not compile with any version below IDE v1.0, and probably will not work well unless IDE v1.0.1 or higher.

zoomkat


why this code doesn't work?
When compiling, it makes a lot of errors! Does it work on Aduino 0022?


Code: [Select]
//for use with IDE 1.0

You have a possible reading issue.
Consider the daffodil. And while you're doing that, I'll be over here, looking through your stuff.   8)


fafidio

@zoomkat
Hi, I'm trying to use two arduino with ethernet shield one as server, and the second server-client: how could I change your ip code to work on my lan?
Code: [Select]

byte ip[] = { 192, 168, 1, 102 }; // ip in lan assigned to arduino
byte gateway[] = { 192, 168, 1, 1 }; // internet access via router
byte subnet[] = { 255, 255, 255, 0 }; //subnet mask
EthernetServer server(84); //server port arduino server will use
EthernetClient client;
char serverName[] = "web.comporium.net"; // (DNS) zoomkat's test web page server
//byte serverName[] = { 208, 104, 2, 86 }; // (IP) zoomkat web

Must I change "char serverName"?
Thanks Fabio

Go Up