Go Down

Topic: Eagle library for 37-pin TFT FPC connector (Read 806 times) previous topic - next topic

Texy

Hi,
I,m looking at designing a shield for a 2.8" TFT display that uses a sm 37-pin fpc type 'connector' which
I plan to solder directly onto the shield pcb rather than using a socket.

http://i00.i.aliimg.com/img/pb/012/759/466/466759012_761.jpg

Without going to the trouble of designing an eagle library for the connection, does anyone know if one already exists?
It's 0.5mm pitch, and has, well, 37-pins  :)

Cheers,
Texy

CrossRoads

Eagle has a lot of symbols in the various connector libraries, it might exist.
Check newark.com, you might be able to download one.
Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Texy

Thanks crossroads. Actually I'm dropping the idea because the 2.8" tft's with the sm flexi cable are the parallel port type not the spi type that I was hoping for. At least that's all I can find on eBay. The advantage of the flexi type is the 1/3rd of the price saving.

Cheers texy

CrossRoads

Designing & building electrical circuits for over 25 years. Check out the ATMega1284P based Bobuino and other '328P & '1284P creations & offerings at  www.crossroadsfencing.com/BobuinoRev17.
Arduino for Teens available at Amazon.com.

Go Up