Go Down

Topic: UNO Rev Unrecognized USB Device after successful install Win7-64bit (Read 808 times) previous topic - next topic

Gongman

Hi all,
Just finished read all the FAQs and postings regarding installation of V1.0.3. As indicated in the FAQ my UNO Rev 3 came as an unknow device.  I followed the instructions to install the driver with success. Once I went to upload a test file, the UNO did not respond. After a replug, reboot etc the UNO now comes up as an "Unknown Device" under Universal Serial Bus controllers.  I have tried several times now to delete the driver and re-install the driver manually however when I select UNO Rev 3, Windows 7 comes back saying it is incompatible. So I have given up for a bit and ask my fellow developers if there is something I have over looked.

Thank you for your help.

Regards,

Bob

James C4S

Capacitor Expert By Day, Enginerd by night.  ||  Personal Blog: www.baldengineer.com  || Electronics Tutorials for Beginners:  www.addohms.com


James C4S

Return for a new one.  If the same problem persists, there is something up with your computer.
Capacitor Expert By Day, Enginerd by night.  ||  Personal Blog: www.baldengineer.com  || Electronics Tutorials for Beginners:  www.addohms.com

Gongman

Problem solved.  Bad USB cable. I finally tried it on another computer with the same result. Switched out the USB cable and.....

Cheers,

B

Go Up