Go Down

Topic: Chip reversal !!! (Read 1 time) previous topic - next topic

Coding Badly


Finger nail polish is good for that.  I use a bright lime green color.  (Also works well on gun sites.)

stonent

My board has the notch silkscreened on it, as well as the socket has a notch, as well as the chip having a notch.

retrolefty


My board has the notch silkscreened on it, as well as the socket has a notch, as well as the chip having a notch.



Some need more of a hint then that I guess.  ;)

Lefty

Grumpy_Mike

I use that liquid paper correcting fluid to mark the ends of plugs and sockets. I also put a dab by pin one when I have burnt a boot loader into a 328 chip.

dannable

One of my 'knock off' boards has the socket, and therefore the notch, the wrong way round!
Beginners guide to using the Seeedstudio SIM900 GPRS/GSM Shield

Go Up