Loading...
« previous topic   next topic »
Pages: [1]   Go Down
Author Topic: Inviare sketch tramite scheda ethernet  (Read 166 times)
0 Members and 1 Guest are viewing this topic.
mooger
Offline Offline
Newbie
*
Karma: 0
Posts: 12
View Profile
« on: January 23, 2013, 05:41:19 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Salve,avrei l'esigenza di inviare gli sketch ad arduino tramite ethernet o meglio ancora via wifi,invece della classica connessione seriale,volevo sapere se era possibile.Ovviamente usando la shield ethernet apposita,e per il wifi magari una XBEE.Grazie.
Logged

PaoloP
Cagliari
Offline Offline
Faraday Member
**
Karma: 49
Posts: 3018
View Profile
« Reply #1 on: January 23, 2013, 05:45:50 pm »
 Bigger Bigger Smaller Smaller Reset Reset
--> http://labs.arduino.cc/TFTPBootloader/Index
Logged
CodeBender: http://codebender.cc/register/?referrer=PaoloP

mancio
Fidenza (PR)
Offline Offline
Full Member
***
Karma: 3
Posts: 136
Arduino rocks
View Profile
WWW
« Reply #2 on: January 23, 2013, 05:48:59 pm »
 Bigger Bigger Smaller Smaller Reset Reset
Ti linko un ottima guida per questo

www.freetronics.com/pages/how-to-upload-a-sketch-to-your-arduino-via-a-network#.UQBolzwuLGU
Logged

mooger
Offline Offline
Newbie
*
Karma: 0
Posts: 12
View Profile
« Reply #3 on: January 23, 2013, 05:49:15 pm »
 Bigger Bigger Smaller Smaller Reset Reset
grazie per il link quindi da quanto ho capito,qualcosa c'e',ma e' ancora in via di sviluppo,giusto?
Logged

PaoloP
Cagliari
Offline Offline
Faraday Member
**
Karma: 49
Posts: 3018
View Profile
« Reply #4 on: January 23, 2013, 05:51:12 pm »
 Bigger Bigger Smaller Smaller Reset Reset
esatto.
Logged
CodeBender: http://codebender.cc/register/?referrer=PaoloP

Pages: [1]   Go Up
Print
« previous topic   next topic »
 
Jump to: