Pages: [1]   Go Down
Author Topic: GSM Shield v.2 + Arduino UNO... some problem!!!  (Read 262 times)
0 Members and 1 Guest are viewing this topic.
0
Offline Offline
Newbie
*
Karma: 0
Posts: 30
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi,
I buyed this shield board: http://arduino.cc/en/Main/ArduinoGSMShield
with external antenna connector.
I have an Arduino UNO board.
I plugged shield on Arduino board and with Arduino IDE v1.0.5 I tryed to use a GSM library with examples to try a sms send and receive.
While testing the program seems to freeze on initializing gsm in .begin method. I attached an image to focus the poi of stop...
Could someone help me, please?


* bloccoinizializzazionegsm.jpg (178.06 KB, 716x513 - viewed 14 times.)
Logged

0
Offline Offline
Newbie
*
Karma: 0
Posts: 30
Arduino rocks
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

just an information...
PINNUMBER was set to "" due to not set sim's pin number.
But I tryend with sim's pin number set and PINNUMBER correctly also but the results was not changed.
I tried alto to power the boards with external power ... nothing changing...


help please!!!
Logged

Pages: [1]   Go Up
Jump to: