Go Down

Topic: sample short audio clips and save to sd card as .wav (Read 1 time) previous topic - next topic

Hello,

I have this microphone http://www.fasttech.com/products/1012008-lm386-digital-microphonesound-sensor-shield-module and with it I would like to record audio for 5 seconds, save it as .wav and send it to Sd card. I don't know where to begin. Any help would be appreciated.

Thanks in advance, Mike.

CrossRoads

Start by defining your sampling rate and # of bits/sample.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.


CrossRoads

Ok, 10KHz, 10 bits.
You have 1024 words (16 bits) of SRAM. Total.
So you could store 1024 samples max.
You need 10,000 sample/sec * 5 sec = 50,000 samples.
Can you add some external memory? None of the AVR chips have enough for a 1 clip capture.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Ram or flash storage? I have a SD card wired and ready.

CrossRoads

Need more RAM to capture the 5 seconds before you transfer to the SD card.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

xl97

I have never used it.. but maybe the WaveRP lib.. (its a lib for recording..)..

not sure how it all works myself.. never tried it.

http://code.google.com/p/waverp/downloads/list

quote:
Quote

WaveRP is an Arduino library for recording and playing Wave files with the Adafruit Wave Shield. It records 8-bit mono files at 4,000 to 44,100 samples per second.

Use of the Wave record/play library, WaveRP, requires the following:

Arduino with a 5 volt 328 processor.

Low noise power source such as a nine volt DC adapter or battery.

Adafruit Wave Shield (version 1.1 is best but 1.0 works)

Microphone preamp. A circuit for a simple preamp is included in the documentation.

Microphone, PC type with 3.5 mm plug. See the documentation for details.

SD/SDHC formatted with 32KB allocation units.

See the readme.txt file and library documentation for more information

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy