Pages: [1]   Go Down
Author Topic: Latte Printer  (Read 329 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Karma: 0
Posts: 1
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Hi there,
I am new in Arduino.
I would like to create a latte printer like this.
But I dont know how to get the motor signal to trigger the stepper to forward the glass and how to trick the paper sensor there has a paper.

Here is the reference

Any ideas??

Global Moderator
Offline Offline
Shannon Member
Karma: 220
Posts: 13846
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Welcome to Arduino,

As you are new to it I propose you first spend a few days on the tutorial section and experiment with the code to get a feeling of the Arduino language first. What can it do and how it is done. The tutorial include servo examples and you will definitely find some useful parts of code .

- -

2nd, you should tell a lot more about the goal of the project and the hardware you intend to use (types - links to datasheets etc)
The more info you give, what you tried, what worked, what not, what you expected, what you got etc, the better answers your get.


Rob Tillaart

Nederlandse sectie -,77.0.html -
(Please do not PM for private consultancy)

Offline Offline
Sr. Member
Karma: 7
Posts: 393
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I second what robtillaart said. But to answer your question about how to trick the paper sensor, just block the perticular photointeruptor the detect the paper...

Pages: [1]   Go Up
Jump to: