Pages: [1]   Go Down
Author Topic: Max31855 Internal temp strange value  (Read 710 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Jr. Member
**
Karma: 0
Posts: 66
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I am using a shield with the MAX31855 with the library from adafruit with my arduino duemilanove.
Using the library example "serialthermocouple" I have measurments of the internal temp of the max31855 about 15 degrees higher than it is supost to be
Using a mixure of water and ice that has a temp o 0º I get measurments of the temp os the thermocouple about 15 ºc.
Does this means my shield is broken ? Or am I doing something wrong ?

Thanks in advance

José

Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 216
Posts: 13664
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Do you have a link to the code?

If the reading is constant 15° too high there might be an error in the code, or there is a need for calibration?
Do you have other readings that confirm a 15° offset?  (e.g. room temp, cooking water, body temp 37C etc)
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Offline Offline
Jr. Member
**
Karma: 0
Posts: 66
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Thanks for the reply
Today I figure out that something is wrong, maybe with the max31855.
I will check and get back with news.

Jose
Logged

Pages: [1]   Go Up
Jump to: