Go Down

Topic: error: avrdude: stk (Read 1 time) previous topic - next topic

bethesdakid

Can you give steps to clear this error so programs will again upload? I have onlu the usb cable. Have tried to clear the error by operating the reset on the board. no go. Do I need another cable to rest individual pins? wheere to buy it?
teaches science for ReSet in the inner city

bethesdakid

Can you give steps to clear this error so programs will again upload? I have only the usb cable. Have tried to clear the error by operating the reset on the board while uploading the BLINK program. no go. Please do it step by step. I'm not very experienced with the UNO.
BTW... the program that preceded the error was "SleepDEMOserial"
teaches science for ReSet in the inner city

Nick Gammon

Please do not cross-post. This wastes time and resources as people attempt to answer your question on multiple threads.

Threads merged.

- Moderator

Nick Gammon

What board? What version of the IDE? What operating system are you using? Help us out here.

bethesdakid

the board is the Arduino Uno rev 3 with no external components connected to it.
IDE is 1.0.3 (I believe that is what you are referring to)
  OS 10.4.11

after uploading sleep software the goal was to measure  sleep current of the UNO by itself to calculate the life of a battery pack, 4 ea AA rechargeables producing 4.6V at 2450maH. After the SLEEPDEMOserial upload, the next upload produced the error.
teaches science for ReSet in the inner city

Go Up