Go Down

Topic: Simple MSGEQ7 tutorial (Read 7121 times) previous topic - next topic

tronixstuff

If anyone's interested, I wrote a short tutorial on using the MSGEQ7 and using them to make simple spectrum analyzers.
http://tronixstuff.wordpress.com/2013/01/31/tutorial-arduino-and-the-msgeq7-spectrum-analyzer/
A couple of Arduino tutorials at http://tronixstuff.com/tutorials - My Arduino book - http://nostarch.com/arduino. Please don't ask for help via direct message - use the forum!

robtillaart

Very well done! - Also the other chapters are worth reading!
+1 ;)
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

marco_c

Good job as always. Your tutorials were great when I start with Arduino in January 2012 - I learned a lot quickly and I still use them as references.  Keep it up!
Arduino Libraries http://arduinocode.codeplex.com
Parola for Arduino http://parola.codeplex.com
Arduino++ blog https://arduinoplusplus.wordpress.com

tronixstuff

Thank you. I'm in the process of updating them all, so they should be better in a month or two. :)
A couple of Arduino tutorials at http://tronixstuff.com/tutorials - My Arduino book - http://nostarch.com/arduino. Please don't ask for help via direct message - use the forum!

tronixstuff


If anyone's interested, I wrote a short tutorial on using the MSGEQ7 and using them to make simple spectrum analyzers.
http://tronixstuff.wordpress.com/2013/01/31/tutorial-arduino-and-the-msgeq7-spectrum-analyzer/


I've followed this up with adding an RGB LED cube for the display effects:

http://tronixstuff.com/2013/11/09/project-led-cube-spectrum-analyzer/
A couple of Arduino tutorials at http://tronixstuff.com/tutorials - My Arduino book - http://nostarch.com/arduino. Please don't ask for help via direct message - use the forum!

Start2222

Inspiring me to do some arduino.  Thanks.

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy