Go Down

Topic: Simple MSGEQ7 tutorial (Read 4825 times) previous topic - next topic

tronixstuff

If anyone's interested, I wrote a short tutorial on using the MSGEQ7 and using them to make simple spectrum analyzers.
http://tronixstuff.wordpress.com/2013/01/31/tutorial-arduino-and-the-msgeq7-spectrum-analyzer/
Check out my Arduino tutorials at http://tronixstuff.com/tutorials - Order my  Arduino book from http://nostarch.com/arduino

robtillaart

Very well done! - Also the other chapters are worth reading!
+1 ;)
Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

marco_c

Good job as always. Your tutorials were great when I start with Arduino in January 2012 - I learned a lot quickly and I still use them as references.  Keep it up!
Arduino libraries http://arduinocode.codeplex.com
Parola for Arduino http://parola.codeplex.com

tronixstuff

Thank you. I'm in the process of updating them all, so they should be better in a month or two. :)
Check out my Arduino tutorials at http://tronixstuff.com/tutorials - Order my  Arduino book from http://nostarch.com/arduino

tronixstuff


If anyone's interested, I wrote a short tutorial on using the MSGEQ7 and using them to make simple spectrum analyzers.
http://tronixstuff.wordpress.com/2013/01/31/tutorial-arduino-and-the-msgeq7-spectrum-analyzer/


I've followed this up with adding an RGB LED cube for the display effects:

http://tronixstuff.com/2013/11/09/project-led-cube-spectrum-analyzer/
Check out my Arduino tutorials at http://tronixstuff.com/tutorials - Order my  Arduino book from http://nostarch.com/arduino

Go Up