this is massively overkill output wise though at 16.
why not use the Arduino PWM? It has six channels
Quotewhy not use the Arduino PWM? It has six channelsI'm not just using 1 chip. I need to control 17 RGB strips with full PWM. I'm planning my initial breadboarding to use a arduino mega to drive it, I suspect I might be pushing it's limit with it though, and I want it to do more than just talk to the lights (it will be talking to an ethernet chip and an SD card as well).
There is also very little space to hide cables, so running 68 cables around will look very ugly.What I want to do is have a small sub-board for each strip (or 2), with just a 4 wire link to all of them, that way I can use a piece of CAT5 to make it look neat. This requires 3 or 6 PWM channels on each sub-board, 16 is overkill and racks up the price quite a bit (particularly if I scale up the numbers later)
How about WS2801 per strip, or one for every 3 strips?http://www.adafruit.com/datasheets/WS2801.pdf
Please enter a valid email to subscribe
We need to confirm your email address.
To complete the subscription, please click the link in the
email we just sent you.
Thank you for subscribing!
via Egeo 16