Go Down

Topic: XBEE (Read 287 times) previous topic - next topic

amitash

Hi,
I have the iboard pro: http://imall.iteadstudio.com/iboard-pro.html
The serial connection of the XBEE slot is connected to the RXD3\TXD3 pins.

I tried to set the serial to 3:

XBee xbee = XBee();

void setup() {
  ....
  xbee.setSerial(Serial3);
  ....
}

but I don't get response.
I tried the same code with arduino Ethernet + XBEE shield and everything works fine.
Any suggestions?
Thanks

amitash

Problem solved.
I was missing:
Serial3.begin();

Go Up