I am relativity new to using the Arduino and have a few questions on a project I am working on. I am first off going to start by listing off the parts that I am using and the site that you can use as reference.
Arduino R2 (I have the R3 but I was not using it for this project. If I end up needing it I can use that too.)
The PS2x Arduino Library and a PS2 controller - http://www.billporter.info/2010/06/05/playstation-2-controller-arduino-library-v1-0/
The SeeedStudio Motor Shield for Arduino R2 - http://www.seeedstudio.com/depot/motor-shield-p-913.html?cPath=132_134
This PS2 Controller (Basically the same just wireless) - http://gdgt.com/dreamgear/i-glow/2-4ghz-wireless-controller/for-ps2/
Ok so here is the deal. My project is for most part simple. The problem I am having may seem very simple to someone but because I am new to it I do not under stand the code enough to get it working. I need to make it so that I can get my controller to make the motor/servo move forward when the left analog joystick is pushed up and vice versa. There is no need to make the car turn as well.
I was going to post the code that I have so far but I have a feeling that it is completely incorrect. Like I said I do not know to much for the Arduino. I will say that I have been trying to work with the dummy code for the SeedStudio Motor Driver that you can find on the wiki here: http://www.seeedstudio.com/wiki/Motor_Shield_V1.0
. Same goes for the PS2x controller.
The last problem is that I am not sure how I am going to wire the wireless receiver connected to the arduino correctly because the shield does not have any I/O outputs on it. It does however have the grove connectors on them and I do have 2 Grove Relays and the cables so I can use those as well. If you have any ideas please let me know.
I really want to get this working but I just a starter in the world of Arduino. If you think you can help me please let me know. I can talk on skype if you want to do some 1-on-1 work. That would be great!