Go Down

Topic: Can you develop code for 2 DUE's on one Macbook? (Read 778 times) previous topic - next topic

userjm4a

I want to develop test code for 2 Arduino Due's hooked each up to a USB hub which is hooked up to an Apple Macbook.  The Arduino code would just have one Due send a a couple bits to the other Due, which sends them back to the first, via input/output bits, to prove it works.

Is this possible?  Or do you have to plug in one at a time to do development (compiling / downloading / debugging)?  Or is there some other way to do it?

Osgeld

as far as I know if you have different arduino applications open whatever you set in one will be the setting in the other, though it may not show it

I ran into this not too long ago where I was developing on a mega, but the final target was a 328P device so I opened up another arduino IDE, loaded the arduinoisp sketch to the 328, went back to the mega window attempted to upload a change and got an invalid device signature error from the mega, which the signature was for the 238P.
http://arduino.cc/forum/index.php?action=unread;boards=2,3,4,5,67,6,7,8,9,10,11,66,12,13,15,14,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,86,87,89,1;ALL

userjm4a

So, if I needed the ability to run multiple Due's at once, where each of them could require breakpoints & debugging, then the only safe way would be to have a computer per Due?  That is, 4 Due's would require 4 Airbooks (or PCs) in order to debug all 4 at once, with each Due having a one-to-one connection with its own host computer?

CrossRoads

I've had 2 IDEs running with 2 serial ports open talking to the 2 serial ports on a '1284P.
Don't know why 3 or 4 would be any different, say with a Mega and more USB/Serial adapters, or with more cards.
Designing & building electrical circuits for over 25 years.  Screw Shield for Mega/Due/Uno,  Bobuino with ATMega1284P, & other '328P & '1284P creations & offerings at  my website.

Osgeld

#4
Feb 03, 2013, 04:13 am Last Edit: Feb 03, 2013, 04:15 am by Osgeld Reason: 1
yea my situation was 2 different chips, it may act differently with the same chips but different serial ports, I haven explored deeply into it
http://arduino.cc/forum/index.php?action=unread;boards=2,3,4,5,67,6,7,8,9,10,11,66,12,13,15,14,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,86,87,89,1;ALL

Go Up
 


Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy