I want to know how i can get the arduino to count the pulses from the the x-band when it detects movement.
The module doesn't output pulses, just the difference (Doppler) frequency of the transmitted and received signals.
These modules (boards) are not FCC approved. They are designed to comply with FCC Part 15 Rules and Regulations. They are not in a finished product form. They are strictly intended for experimental purposes only. If you wish to use these modules in an actual product (a non-experimental capacity), the module must first be designed into the product then the whole product must be approved by the FCC. Parallax, Inc. is not responsible for special, incidental, or consequential damages resulting from any breach of warranty, or under any legal theory, including lost profits, downtime, goodwill, damage to or replacement of equipment or property, and any costs of recovering, reprogramming, or reproducing any data stored in or used with Parallax products.
signal oscillates with motion
Quotesignal oscillates with motionWhatever that means.I took it to mean the usual simple mixer output.