Pages: [1]   Go Down
Author Topic: Redfly WiFi Shield WebServer problem  (Read 938 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

I have an Arduino Uno (and MEGA) and just received the RedFly WiFi shield.

I am going through the simple WebServer example and can not connect to the WebServer.

Here is the output from the Arduino. I connect to my wireless and everything looks like it starts properly. When I go to http://192.168.1.15 the browser just spins.

Un
AT+RSI_FWVERSION?
AT+RSI_BAND=0
AT+RSI_INIT
AT+RSI_NUMSCAN=0
AT+RSI_SCAN=0
AT+RSI_NETWORK=INFRASTRUCTURE
AT+RSI_PSK=xxxxxxxx
AT+RSI_JOIN=nintendo,0,2
AT+RSI_IPCONF=1,0,0
IP:192.168.1.15
AT+RSI_LTCP=80

I am running Arduino 1.0.3 and RedFly 4.5.0.

Thoughts or suggestions? I also could not get my Adhoc network working...I guess that will be another post smiley

Thanks in advance.

Franz
Logged

Offline Offline
Newbie
*
Karma: 0
Posts: 2
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ok I finally figured it out. I was connecting the RedFly to my 'guest' network on my router. The default setting for the guest network is to NOT allow any access to My Local Network.

w00t w00t.
Logged

Pages: [1]   Go Up
Jump to: