Pages: [1]   Go Down
Author Topic: Esplora Sensor Test Program  (Read 2929 times)
0 Members and 1 Guest are viewing this topic.
US
Offline Offline
Full Member
***
Karma: 4
Posts: 183
Electronics are the new Legos
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

Ok, an ideal Esplora test program would write to a Processing or Serial monitor.  But that requires alot of work and would not be pretty.

So grab an Adafruit 1.8" TFT LCD display breakout (not the shield, breakout - at http://adafruit.com/products/358)  Solder header in the holes and plug into the Esplora on the right side black header pins on Esplora.  Download EsploraTest.ino from Github at https://github.com/TheKitty/EsploraApps

Using the program with pictures is available at http://21stdigitalhome.blogspot.com/2013/02/arduino-esplora-with-display-exercise.html

It is a great demo of all the Esplora library calls.

I hope this helps fellow Esplora owners.
Logged

Global Moderator
Netherlands
Offline Offline
Shannon Member
*****
Karma: 220
Posts: 13846
In theory there is no difference between theory and practice, however in practice there are many...
View Profile
 Bigger Bigger  Smaller Smaller  Reset Reset

looks good!
Logged

Rob Tillaart

Nederlandse sectie - http://arduino.cc/forum/index.php/board,77.0.html -
(Please do not PM for private consultancy)

Mexico
Offline Offline
Newbie
*
Karma: 0
Posts: 9
View Profile
WWW
 Bigger Bigger  Smaller Smaller  Reset Reset

Nice Sketch...been learnign from it
thanks
Logged

Pages: [1]   Go Up
Jump to: